Jump to content
George Peppard

sector file Custom text not showing in EuroScope

Recommended Posts

George Peppard

I have edited the UK.ese file to include taxiway markings (so I don't need to refer to Navigraph constantly) but they don't seem to appear under "Free Text".

Here is what I added:

;EGKK Gatwick Taxiway labels
N051.09.05.617:W000.10.44.543:EGKK Taxiway Labels:08R
N051.08.50.549:W000.12.33.307:EGKK Taxiway Labels:08L
N051.09.07.806:W000.10.12.142:EGKK Taxiway Labels:AS
N051.09.09.580:W000.10.12.536:EGKK Taxiway Labels:AN
N051.09.07.268:W000.10.32.227:EGKK Taxiway Labels:AN
N051.08.58.156:W000.12.01.297:EGKK Taxiway Labels:J
N051.09.03.629:W000.11.21.194:EGKK Taxiway Labels:J
N051.09.10.516:W000.10.33.787:EGKK Taxiway Labels:J
N051.09.15.349:W000.10.10.671:EGKK Taxiway Labels:J
N051.09.18.016:W000.10.39.747:EGKK Taxiway Labels:K
N051.09.24.085:W000.10.04.391:EGKK Taxiway Labels:K
N051.09.26.878:W000.10.13.345:EGKK Taxiway Labels:KA
N051.09.25.936:W000.10.41.399:EGKK Taxiway Labels:L
N051.09.22.385:W000.11.09.326:EGKK Taxiway Labels:L
N051.09.34.380:W000.10.11.068:EGKK Taxiway Labels:L
N051.09.15.349:W000.10.10.671:EGKK Taxiway Labels:M
N051.09.18.340:W000.10.21.931:EGKK Taxiway Labels:N
N051.09.16.942:W000.10.24.661:EGKK Taxiway Labels:NA
N051.09.23.867:W000.10.29.309:EGKK Taxiway Labels:P
N051.09.32.639:W000.10.50.603:EGKK Taxiway Labels:Q
N051.09.27.498:W000.10.52.184:EGKK Taxiway Labels:QB
N051.09.35.517:W000.10.57.048:EGKK Taxiway Labels:R
N051.09.21.203:W000.10.57.432:EGKK Taxiway Labels:R
N051.09.13.291:W000.10.57.612:EGKK Taxiway Labels:R
N051.09.14.798:W000.11.16.170:EGKK Taxiway Labels:S
N051.09.10.439:W000.11.47.682:EGKK Taxiway Labels:U
N051.09.12.287:W000.10.13.818:EGKK Taxiway Labels:Z

However, these do not appear in EuroScope.

Any help is appreciated :)

Thanks,
George

Share this post


Link to post
Share on other sites
Anastasios Mpithas

Hey George,

Open Euroscope

Click here: 15baf2927c9440f48a7c361a223cdbc3.png

Click the + symbol on Free Text: b6ca902f45eb42efb30bda8e62978ca2.png

Enable the 'EGKK Taxiway Labels': 6e856166a6a740f8acf0cf3f43c0b5b6.pngand click Apply/OK

Then, the text should appear!

Hope this helps!

Tasos

Share this post


Link to post
Share on other sites
Alex Hodgkinson

The .ese file does not contain any sector file information. 

You need to put them in the .sct file under [FREETEXT] 

11 hours ago, George Peppard said:

I have edited the UK.ese file to include taxiway markings (so I don't need to refer to Navigraph constantly) but they don't seem to appear under "Free Text"

 

Edited by Alex Hodgkinson

Share this post


Link to post
Share on other sites
George Peppard

Tried both of these and it's now working. Thanks a lot guys!

Share this post


Link to post
Share on other sites
Anastasios Mpithas
2 hours ago, Alex Hodgkinson said:

The .ese file does not contain any sector file information. 

It does. The Freetext goes to .ese not to .sct

(If you search Freetext on .ese you will see it ;) )

Share this post


Link to post
Share on other sites
Alex Hodgkinson
2 hours ago, Anastasios Mpithas said:

It does. The Freetext goes to .ese not to .sct

(If you search Freetext on .ese you will see it ;) )

Does It? Never knew that.

Share this post


Link to post
Share on other sites
Anastasios Mpithas
55 minutes ago, Alex Hodgkinson said:

Does It? Never knew that.

Basically whatever is contained on the Free Text category, except the SCT2 sub-category is from the .ese (like the Airspace Bases labels, VRPs labels etc.) I think!

 

Share this post


Link to post
Share on other sites
Alex Ashley

[LABELS] = Included in the sector file. This is used for SMR markings and other stuff which requires a colour specifying.
[FREETEXT] = Included in the .ese. This is used for airspace bases.

Share this post


Link to post
Share on other sites
Alex Hodgkinson

Its been a while since I looked inside a sector file!

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

  • Similar Content

    • Ben Abe
      By Ben Abe
      Hello,
      Does anyone have an SMR for Bournemouth? Cheers,
      Ben
    • Harry Sugden
      By Harry Sugden
      UK Controller Pack
      The official controller pack for all VATSIM UK positions. Where there are no specific profiles for airports/positions that are used for training, controllers may use the Generic profiles provided within.
      Specific Profiles for:
      London (Area) Scottish (Area) Birmingham East Midlands Edinburgh Essex - Stansted and Luton Glasgow London Heathrow London Gatwick Manchester Thames - London City and Biggin Observer Group Session Installation instructions are contained within the pack: unzip the controller pack first, then within the 'UK' folder inside will be a README file (PDF format). Please read this carefully before moving the pack into the appropriate location.
    • Harry Sugden
      By Harry Sugden
      The Sector File <- Download Link
      You can also use the auto-download feature of EuroScope to obtain the latest version.
      Found a bug while using the new sector file? That’s anything from an auto-handoff that doesn’t work, to a missing position, to a misbehaving agreement… Use the EuroScope department of the helpdesk!
      Alternate ownerships for observing/mentoring
      It's possible for mentors to get the correct sector ownerships without needing to select a primary frequency. Just go to Other settings...Sector ownership setup, click 'select all' and select 'Mentoring TWR/APP' from the list. For mentoring on LON_*_CTR (or SCO_CTR) you will need to select the relevant 'Observing LON_*_CTR' option instead to specify which sector(s) you are interested in.
      The LON_*_CTR can also be used for observing purposes rather than mentoring, but this requires a quick edit of the UK.ese file to tell Euroscope what your log-in callsign for observing will be. (E.g. HS_OBS.) Open UK.ese in Notepad or another text editor and the line to edit is at the top and clearly indicated. There's also an 'Observing London FIR' option that will give you ownership of every sector in the FIR, regardless of who else is online.
      Adjacent airports shown when using the General Setting 'Set active APT by owned sectors'
      There is now an option to choose which departure airports to show, by means of a special runway 00 at '000A Show adjacent departure airports' in the Runway Selector dialogue. This mainly affects London and Scottish Control sectors.
      Option 1, with a selected runway 00 on the right hand side (under DEP or ARR, or both, doesn't matter): the departure list will show departures from all airports within the sector, or immediately adjacent to it.
      Option 2, with no runway 00 selected: the departure list will show departures only from airports for which you have top-down responsibility for TWR services. That is, only when nobody else is covering it. This is the mode of operation found in previous versions of the sector file.
      Contributing to the Project
      Repository
      Contributing Guide
×
×
  • Create New...