Jump to content
Sign in to follow this  
Luke DAmbrosio

atc-discussion ATC observer

Recommended Posts

Luke DAmbrosio

Hi there,

As you can probably guess I am new here, I am heavily interested in (eventually) becoming an ATC but want to know how I can begin to observe current communications. I have tried to search through the forums to find a teamspeak IP as the registration link isn't working for me in some assistance on how to do this as I rather confused with the software. Thanks

Share this post


Link to post
Share on other sites
Adam Turner

Hi Luke,

Welcome to VATSIM! The instructions at https://www.vatsim.uk/mship/manage/teamspeak/new should be enough to get you started on Teamspeak. Actual pilot to controller communication is handled through Euroscope, there's a short guide on how to install here: https://youtu.be/41EHdiE_n3Q.

Slack is a great place to ask for help with Euroscope, observing and anything else. You can register by going to https://www.vatsim.uk/mship/manage/dashboard and finding the section called Slack. 

Share this post


Link to post
Share on other sites
Luke DAmbrosio

Thanks Adam,

 

I have Euroscope installed now so I shall head over to slack for some assistance on how to get it set-up to listen to communications. 

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

  • Similar Content

    • Trevor Gibson
      By Trevor Gibson
      Just wondering now that I have my S1 at some point after I operated at EGCC GND would it be possible to control EGAA. How would I go about getting that sector or is Belfast not available 
    • Joshua Seagrave
      By Joshua Seagrave
      Hi all,
      I've noticed recently a few instances where GND controllers are refusing to give aircraft departing 23R at EGCC holding point J1 due to the real-world situation of Max 8's being parked there. Whilst I understand that we are a simulation network, and we try to replicate real-world circumstance where practical, I don't think that insisting on limitations that act to the detriment of people flying out of Manchester conforms with the spirit of the game.
      If pilots wish to simulate the max 8's blocking J1 they are, of course, more than welcome to, but if someone specifically requests J1, it should be given. Real world, the lack of access to J1 is causing real issues to airlines operating long-haul routes, it makes no sense to impose the same limitation on people wishing to fly those same routes on VATSIM.
      Contrary opinions or thoughts welcome.
    • Sathiya Jeganathan
      By Sathiya Jeganathan
      Hello Moderators,
      I have been waiting a long time for the next OBS ATC training session so I can carry on with my training. I have finished the theory course already. Hopefully I will get one soon. 
    • Edward Berkley
      By Edward Berkley
      Hello all,
      When setting up an atis, I like to add additional information such as: "Delivery is closed" etc. However, whenever a new atis is updated, the information resets itself, removing my addition information and the only way I see of doing it is to re-add the information every time a new atis is updated. Is there a better way of doing this?
      Thanks,
      Ed
    • Nick Marinov
      By Nick Marinov
      Hi all,
      As I see this coming up on Slack, I thought I'd post this here while the official BoG blog post is being proof-read and posted: the UK2 server has been taken out of service and the UK1 server has been renamed to just "UK". In your client, you would need to change the server to "UK". However, for voice, I've found there's no need to change any of your voice configuration settings as far as servers are concerned.
      From personal experience, some of the servers (Germany, in particular) seem to have some problems with the METARs being displayed: https://forums.vatsim.net/viewtopic.php?f=6&t=79161 , however, the UK server seems to have no issue with them. I hope this helps somebody while we all settle down with the change and the official announcement becomes public 😄 
×
×
  • Create New...