Jump to content
Steven Messenger

atc-discussion EGPX 28th March 1100-1730z ROSTER

Recommended Posts

Steven Messenger

Hi all,

 

CTP is coming up and we'll need some help from EGPX; we will be opening TWO Scottish Area Control positions for the event. Routes won't be posted until a day before the event but it's likely one or two tracks will pass through EGPX airspace. 

 

It would be appreciated if EGPX_CTR could be staffed from 1130z-1730z. Also ATC at underlying aerodromes would be appreciated too. 

 

This will be rostered so controllers who would like to control should reply to this thread with their availability. (Please add an additional comment if you are scheduled to control EGGX with your times also please)

 

It should be noted (just in case) EGPX controllers must be C1 rated or above.

 

This thread will close on Wednesday Evening.

 

Thanks,

Steven

 

 

 

ROSTER HERE

https://docs.google.com/a/vatsim-uk.co.uk/spreadsheets/d/1ezGlh-lwlvzVagqUS2LaRbsjGSzC7ujUVVyUCU4GFLk/edit#gid=17

Edited by George Wright

Share this post


Link to post
Share on other sites
Simon Irvine

Available throughout Steven.

 

Thanks

Share this post


Link to post
Share on other sites
Kris Thomson

Available throughout Steven. Not sure when I will be rostered for Shanwick but they are aware I may be needed for domestic sectors earlier on in the day.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

  • Similar Content

    • Sebastian Wheeler
      By Sebastian Wheeler
      Just a slight query related to the above:
      I was fortunate enough to partake in a weeks worth of work experience with NATS recently, and while at whitely on the ADC sims, I heard the following phraseology being used "G-ABCD, Cleared to enter controlled airspace via Route A, at or below altitude 2000 feet, QNH 1014."
      Upon asking one of the pseudo-pilots about the change, I was told it is "new phraseology" can anyone else confirm whether this is the case? Apparently, it was put in place after some confusion from pilots after receiving a "not above" clearance.
    • Steve Riley
      By Steve Riley
      Just reading the new sid charts , am I right in saying hand offs are going to LONDON or SCOTTISH  and not radar as no mention of Radar on the charts.
      2. After departure, aircraft shall remain on the Tower frequency until instructed. 3. En-route cruising levels will be issued after take-off by 'London Control'. 4. Report callsign, SID designator, current altitude and cleared level on first contact with 'London Control'.
      I have not got the old charts to confirm this as I take them straight from NATS web site. 
      Also frequencies have changed are we changing them within ES ?
        123.980, 131.005  BIRMINGHAM APPROACH/RADAR
        118.305  BIRMINGHAM TOWER
      121.805  BIRMINGHAM GROUND 
       

       
       
    • Thomas Wowk
      By Thomas Wowk
      As above, how do you guys assess the runway surface condition on VATSIM? Do you make a visual assessment from the visual control room in correlation to the current/prevailing weather conditions or do you assess this purely off the METAR/TAF?
       
      The only reason i ask it that the surface condition of a runway really affects our landing performance (each operators SOP's may be different for the same aircraft type) Specifically if the runway is declared as DRY full length our crosswind limitations may be increased, whereas if the runway is declared WET full length, crosswind limitations are decreased. If i also needed to return after departure due to an emergency and perform an overweight landing, a DRY/WET surface also makes quite a difference for our overall LDA requirements. 
       
      Cheers
    • Thomas Wowk
      By Thomas Wowk
      Hi all,
       
      For the ones who enjoy carrying out IFR circuits in large aircraft, Doncaster Sheffield (EGCN) accepts visual circuits for aircraft above 5,700kg - B737/B757/B767/B747 etc. 
       
      The circuit profile & procedure can be found in the textual data in the AIP for EGCN. Primarily speaking only one aircraft can be in the circuit at a time. Be nice to get TWR on at EGCN from time to time to accept more training traffic within the network.
       
      The circuit profile briefly summarised as below:
       
      Visual circuits by aircraft above 5700 kg must comply with the following noise abatement procedures.
       
      i. Runway 02 After departure turn right crosswind at no greater than 2.5 DME, fly downwind at 2000 FT QNH, report final south of Bawtry (3 DME) and not below 1500 FT QNH.
      ii. Runway 20 After departure climb on track 190°, at 1.5 DME turn left crosswind, fly downwind at 2000 FT QNH and report final not below 1500 FT QNH
       
      Cheers.
       
       
    • Chris Pawley
      By Chris Pawley
      The Letter of Agreement between London and Amsterdam (Dutch vACC) is revised to take into account changes in AD3 at the end of 2018. It's available here.
       
      Chris.
×
×
  • Create New...